Tag: Videos

Old School Repair: This Dude Welds A Crankshaft Back Together Like A Boss! It Was Broken In Two!

Dec 23, 20211320 Engine Tech, 1320 Tech Story, Apex Engine Tech, Apex Tech Stories, ENGINE, TECH, Tech Stories, Videos, XL Engine Tech, XL Tech Stories

Old School Repair: This Dude Welds A Crankshaft Back Together Like A Boss! It Was Broken In Two!

If you watch videos from other countries, where guys are doing repairs that would seem nearly impossible without modern tools, you start to appreciate and understand what our grandparents and great grandparents were doing to make similar repairs. It’s a true testament to how good something can be even without CNC machines or what have you. In this video, the only equipment used to fix this completely snapped crankshaft is a drill press, a stick welder, and a lathe. The lathe isn’t anything new, but it does seem to work well, and the guy using it clearly knows what he’s doing. But the lathe could be 50 years old or 5, it’s all the same.

Watch as this guy cleans and machines each end of the broken pieces, which might actually be from two different crankshafts, slides them together, indexes them, and then gets his arc welding on. He then straightens the crank, machines the crank, and finally drills the oiling holes in it and then sends it on its way to be used in some truck or what have you. It’s impressive and you’ll dig it.

[embedded content]

  • Share This
  • Pinterest
  • 0

For GREAT deals on a new or used Land Rover check out Envision Land Rover TODAY!

Dyno Proven 500 Horsepower Combos: Three Stock Bottom End 5.3 LS Combos That Will Make You 500 Horsepower Or More.

Dec 23, 20211320 Engine Tech, 1320 Tech Story, Apex Engine Tech, Apex Tech Stories, ENGINE, ENGINES, TECH, Tech Stories, Videos, XL Engine Tech, XL Tech Stories

Dyno Proven 500 Horsepower Combos: Three Stock Bottom End 5.3 LS Combos That Will Make You 500 Horsepower Or More.

I get asked about LS engine combos all the time, and the overwhelming majority of them are from people who think that they need to build an engine with all aftermarket parts. When I ask them how much horsepower they want to make, the vast majority say something like 450 horsepower. This makes me shake my head, because making 400 to 500 horsepower is simple and doable if you have a 5.3 LS that runs. Stock they make 350 horsepower, so anything you do from there will make real power improvements. A camshaft and headers will make over 400, and when you combine an intake, heads, etc, there are real power numbers to be had. And then there’s nitrous! Okay that’s another video, these are completely naturally aspirated combos that are based on a stock bottom end 5.3L.

Check out Richard’s combos, dyno results, and more in the video below.

Video Description:

HOW DO I MAKE 500 HP WITH MY 5.3L? DO I NEED FORGED INTERNALS TO MAKE 500 HP WITH MY 5.3L? CAN MY 5.3L MAKE 500 HP WITHOUT BOOST? WHAT IS THE BEST CAM TO USE ON MY 5.3L? WHAT ARE THE BEST HEADS TO USE ON MY 5.3L? WHAT INTAKE SHOULD I USE ON MY 5.3L? CHECK OUT THIS VIDEO ON THREE (3) DIFFERENT 5.3L BUILDS THAT NOT ONLY EXCEEDED 500 FLYWHEEL HP, BUT DID SO WITH THE STOCK BOTTOM END (STOCK BLOCK, CRANK, RODS AND PISTONS). ALL YOU NEED ARE THE RIGHT HEADS, CAM AND INTAKE (WITH HEADERS) AND YOU TOO CAN REACH THE 500-HP MARK.

[embedded content]

  • Share This
  • Pinterest
  • 0
Facebook Find: This 1980 Z28 Camaro Is Throwback Greatness I Would Drive Like A Boss

For GREAT deals on a new or used Toyota check out Toyota of West Covina TODAY!

Best Torque Wrench? $450 Snap-On vs Craftsman, ICON, Kobalt, DeWalt, SK Tools, Proto, Wera

Several years ago the guys at Car Craft Magazine did a torque wrench shootout and found that the high dollar models from the big tool brands weren’t better, and in some cases were worse, than the cheap brands like you’d find at Harbor Freight, Home Depot, or Lowes. So when I saw this new test being done by the Project Farm youtube channel I immediately clicked on it. There are a lot of ways to test a torque wrench, but none are as good as using an actual torque wrench tester and that’s exactly what has been done in this video.

In addition to the torque wrench tester, they also did 1,000 cycles to see how accurate the torque wrench was after a lifetime of clicks. Accuracy was measured along with variation and all the results are given in this video. Check it out and see not only which torque wrench is best but also which one is right for you.

Video Description:

10 Wrenches Tested: Snap On, Wera, Craftsman, Kobalt, ICON, DeWalt SK Hand Tool, Proto Tools, Performance Tool, Lexivon, and a vintage Craftsman. Torque wrenches tested for initial accuracy when new at 50, 100, 150, 200 and 250 foot pounds. Wrenches were then tested at 50, 150, and 250 foot pounds in the counterclockwise direction. Subsequently, the wrenches were cycled 1,000 times at 100 foot pounds and then tested again for accuracy. My goal is to ALWAYS provide accurate and honest test results by avoiding outside pressure from manufacturers. To do this, I ALWAYS buy all of the products that I test along with the test equipment and supplies used for the testing. So, thank you very much for helping me achieve this goal by your support of the channel.

[embedded content]

For GREAT deals on a new or used Nissan check out Santa Maria Nissan TODAY!

New Product Install: New Mid-Mount Gen III HEMI Front Accessory Drive – HEMI Swap Greatness!

Dec 23, 20211320 New Drag Race Products, Apex New Products, ENGINE, ENGINES, New Products, TECH, Tech Stories, Videos, XL New Truck Products

New Product Install: New Mid-Mount Gen III HEMI Front Accessory Drive – HEMI Swap Greatness!

One of the most annoying and frustrating parts of any late-model engine swap can be fitting a bunch of accessories that never came in your car up front and in between the engine and radiator. Whether you realize it or not, almost all of the late model V8 cars are considerably larger than their previous counterparts. A new Challenger is bigger than a 1970 Challenger, for example, and so is the underhood space. These new cars are designed to fit around all the stuff that needs to be on these late model engines, and the older cars weren’t. Thankfully the gang at Holley has come up with the solution. Their new Mid Mount accessory drive system is a game-changer.

When Holley came out with accessory drive systems for the LS engine it made swapping one into just about anything much less of a headache, and now Mopar fanatics are going to benefit from the same technology. Their bracketless design means everything fits tight to the block minimizing any chance of interference between accessories and the chassis, body, etc.

Video Description:

Holley’s new Gen III Hemi Mid-Mount Accessory Drive Kits offers a simple, clean and reliable way to install all of the serpentine belt-driven accessories for your late-model Mopar engine onto our patent-pending bracket-less design. This allows the alternator, air conditioning pump, power steering pump, and everything else to be mounted tighter to the engine, making a Gen III Hemi swap an easier affair, regardless if you are using a VVT or non-VVT engine in your build! https://www.holley.com/products/engin…

[embedded content]

  • Share This
  • Pinterest
  • 0
Best Torque Wrench? $450 Snap-On vs Craftsman, ICON, Kobalt, DeWalt, SK Tools, Proto, Wera
For GREAT deals on a new or used INFINITI check out INFINITI of Oceanside TODAY!

Junkyard LS Cam Test: Will The Same Camshaft Work With A Carb, EFI, Nitrous, Or Boost?

Oct 03, 2021ENGINE, ENGINES, TECH, Tech Stories, Videos

Junkyard LS Cam Test: Will The Same Camshaft Work With A Carb, EFI, Nitrous, Or Boost?

When it comes to camshafts there is never a shortage of opinions or available grinds. And one thing that I always find amusing is the “ideal conditions” world that so many hot rodders, racers, and tuners seem to think they are in, when in fact some very small percentage of them are in that place at all. If you are racing at very highly competitive, elite, or combination limited levels, where every single horsepower can make a difference between winning or losing, then having the perfect camshaft might be the difference over a weekend of racing. But if you aren’t in the small percentage of racers who find themselves in that position, then you open up a world that includes a lot of camshafts and engine components that will give you everything you need.

But do you have to have a different camshaft for your LS engine if you are running a carburetor instead of EFI? How about if you add boost to it? Richard Holdener has done the testing so that you can see the answers right here. Watch

Video Description:

DO YOU NEED A SPECIFIC CAM FOR BOOST? WHAT ABOUT FOR A CARB, FOR EFI OR FOR NITROUS OXIDE? WHAT IF I TOLD YOU THE SAME CAM WORKS ON ALL THOSE APPLICATIONS? HAS RICHARD LOTS HIS MARBLES? CHECK OUT THIS VIDEO WHERE I RAN THE SAME CAM ON A CARBURETED LS, A NITROUS LS, AN EFI LS AND A SUPERCHARGED EFI (GAS AND E85) LS. WHAT HAPPENED WHEN I RAN THE SAME COMP CAM DESIGNED FOR AN NA APPLICATION, ON ALL THESE DIFFERENT COMBOS? FULL DYNO RESULTS.

[embedded content]

  • Share This
  • Pinterest
  • 0

For GREAT deals on a new or used Cadillac check out Crestview Cadillac TODAY!

Hagerty Redline Rebuild Video: The 1974 Honda CT70 Is DONE – Watch The Awesome Payoff Video Here

Sep 28, 2021Apex Video, BangShift APEX, BangShift News, MISC, RACING & ACTION, Videos

Hagerty Redline Rebuild Video: The 1974 Honda CT70 Is DONE – Watch The Awesome Payoff Video Here

We’ve been waiting for a while to see this one. The latest project in the Hagerty Redline Rebuild series has been a 1974 Honda CT70 mini-bike. These things have a cult following and command top dollar on the internet, even for forlorn junk. The idea of seeing one taken all the way down to its bare essentials and then re constructed like a brand new one is the coolest part.

As you’ll watch, every single piece of this machine was checked, disassembled, R&R’d or replaced during this build. No stone was left unturned, no part left made anything less than perfect.

We’d ramble on but we don’t need to. You know the drill. Redline Rebuild rules!

Press play below to see this Honda CT70 Redline Rebuild video – Totally awesome!

[embedded content]

  • Share This
  • Pinterest
  • 0
Great Video: Here’s The Inside Story On How The Legendary GMC Syclone Came To Exist And Fly!

For GREAT deals on a new or used Chevrolet check out Bosak Chevrolet TODAY!

Motion Raceworks Rocky Mountain Race Week Daily Coverage: Day One Action From Thunder Valley

Sep 25, 20211320 Event Coverage, 1320 Spotlight, 1320 Videos, BangShift 1320, DRAG RACES, Event Coverage, RACING & ACTION, Videos

Motion Raceworks Rocky Mountain Race Week Daily Coverage: Day One Action From Thunder Valley

Rocky Mountain Race Week is in the books, and we were traveling the route with all these folks so we could bring you the FREE livestream that we had going all week long. It was a week full of fun, adventures, carnage, and more, but even if you were there you wouldn’t have been able to see it all. There is that much going on! But thanks to the folks at Motion Raceworks we’ve got more cool video coverage from the entire week and we’re going to share it all with you one day at a time. They were on-site with their parts merch trailer and were helping people out with great stuff all week long. This is the first video from Day One at Thunder Valley in Noble Oklahoma, which means everyone is racing and there is no on road carnage or anything yet. This is the day where everyone thinks everything is great and that they can win this whole thing. Spirits are high. At least until the racing gets going.

Why? Because some of these poor folks are going to tear their stuff up before they ever get to leave the first track. The good news is that they have all night to work on them because we don’t leave for the next track until the next morning, and the drive isn’t horrible from Thunder Valley to the Texas Motorplex in Ennis. Plus, there is the World’s Largest Summit Racing Equipment store on the way and it’s full of great parts to fix most anything.

Between Summit and the Motion Raceworks trailer full of parts, there was no shortage of new stuff going on hot rods Sunday night.

Here is the video description:

[embedded content]

  • Share This
  • Pinterest
  • 0

Uncovering Original Paint With Oven Cleaner! This 1934 Ford 5 Window Gets Even Cooler!

Sep 19, 2021Hack of the Week, MISC, Project Cars, TECH, Tech Stories, Videos

Uncovering Original Paint With Oven Cleaner! This 1934 Ford 5 Window Gets Even Cooler!

I’m a fan of original paint and patina, but I hate the fake stuff. Sometimes the patina on a ride doesn’t look great because of a horrible repaint that makes the car look worse than it probably does underneath as well, and that’s what Matt was facing on his 1934 Ford 5 Window. It had received a brush on paint job that was doing it no favors, but he thought that there was original paint still hiding under it. After doing some testing, he got it figured out and is going to use oven cleaner to get down to the original paint and hopefully make this thing look a jillion times better than before.

Check out the video description below:

In the last video on the 1934 Ford 5 Window we briefly showed some of the original paint that we had started to uncover. Well after 40ish hours, Matt stripped 99% of tan paint that was brushed on back in the 1950s. Matt walks us through some tips and tricks to using Oven Cleaner to remove unwanted paint. While the paint is worn through in spots, we think it looks way nicer. Let us know down below what you think!!

[embedded content]

  • Share This
  • Pinterest
  • 0

For GREAT deals on a new or used Chevrolet check out Gordon Chevrolet TODAY!

Finnegan And Newbern Make The World’s Biggest Rooster Tail With The Rogers Jet Boat!

Sep 06, 2021FUNNY STUFF, Hack of the Week, MISC, OTHER, RACING & ACTION, TECH, Tech Stories, Videos

Finnegan And Newbern Make The World’s Biggest Rooster Tail With The Rogers Jet Boat!

Jet boat owners love a big rooster tail, because it looks cool not because it makes it go fast. With that said, there is an ideal angle for particular jet boat setups based on hull design, setback, etc. When in “race mode” a boat like this Rogers will want an angle of somewhere around 5 degrees up, but to get an ideal launch you want more water in the water. This is why race boats control the angle of the nozzle so that it can be in the ideal position for launch and then change to the ideal angle for high speed. But some folks use these to make a bigger rooster tail so they can look cool on the river. But not this big of a rooster tail. Cause this, this is something special. You know, like Newbern and Finnegan. This thing is a wheel standing, launch it out of the water machine now. It’s crazy.

They have stacked all the stuff that can make the nozzle aim higher, and taken off every single limiter. And now they have an insane angle that quite literally makes the biggest jet boat rooster tail in history. Oh and did I mention they tested it in a thunderstorm, on the lake, with the pouring rain and lightning all around them? Yeah, cause lightning doesn’t strike water….

Oh, and based on the level of giddy they have going on in this video, I’m expecting a second attempt for even bigger shenanigans.

[embedded content]

  • Share This
  • Pinterest
  • 0

Scary Flamin’ Video: Watch This Mustang Grudge Car Smash The Wall And Erupt Into Flames (Driver Walks Away)

Aug 29, 20211320 Drag News, 1320 Videos, BangShift 1320, BangShift News, CRASH & BURN, RACING & ACTION, Videos

Scary Flamin’ Video: Watch This Mustang Grudge Car Smash The Wall And Erupt Into Flames (Driver Walks Away)

There’s nothing scarier than fire in a race car. Nothing. That’s something being said by an announcer, not even a person who has to be front and center when their whole world looks like the inside of the freaking sun. Of course I’m saying that because of how this video plays out. Shot at the recent Carolina No/Time event at GALOT Motorsports Park in North Carolina, we’re going to see a magnificent looking Fox style Mustang that packs a massive nitrous engine hammer the wall with incredible force and then erupt into flames and look like Ghost Rider’s taxi.

The good news here is that the driver opens the door and climbs out himself. You can tell that the dude is banged up though as he nearly drops to his knees the moment he escapes the flaming hell he was sitting in. So what happened here?

Drag racing happened. This is not a no-prep event, it is a no-time event. So don’t go flapping your gums about the dangers of no prep racing. This was a deal where the guy likely had some decent money on the line and knew that if he was going to beat his opponent he was going to need to bring the power in plenty early and really lean on it. Well, the power came in but the traction went away. It seems like the dude may have stood in on the gas again as the car was crossing the track because the impact to the front corner on the driver’s side is brutally harsh.

That impact breaks the fuel cell which causes the flaming trail of fuel and kicks off the initial inferno. We’re guessing the electric fuel pump keeps the party going for a minute before the safety crew starts hosing the car down with fire suppressant. We hope that the driver makes a full recovery and we hope that the car is repaired. That thing was seriously freaking beautiful.

Press play below to see this brutal crash from the Carolina No Time event at GALOT –

[embedded content]

  • Share This
  • Pinterest
  • 0

For GREAT deals on a new or used Nissan check out Glendale Nissan TODAY!